HERO POWER
Welding Equipment
Welding Equipment
DT-360E
Inverter technology for energy-efficient
Thermal Overload Protection
Multiple welding modes are available
Easy to set up and operate
Built-in multiple adjustable arcs
Supports contact arc initiation
PLC control connection support
0-10V analog interface available to control welding current
Specifications
| Input Power | V | 220V, 1/3Φ | Pre flow time | Sec | 0.2 |
| 380/415V, 3Φ | Post flow time | Sec | 2~15 | ||
| Input voltage range | % | ±15% | Pulse current | A | - |
| Input frequency | HZ | 50&60 | Pulse frequency | HZ | - |
| Rated input capacity | KVA | 15 | - | ||
| KW | 10.7 | - | |||
| Rated output | V | TIG：24.4 | Pulse Ratio Width | % | - |
| STICK：30 | Duty cycle | - | 360A/60% | ||
| A | TIG：360 | 279A/100% | |||
| STICK：250 | Water cooler control | - | ˇ | ||
| Welding amperage range | A | TIG：5~360 | Cleam | - | - |
| STICK：5~250 | Gas check | - | ˇ | ||
| Efficiency | % | 82 | Crater control | - | Crater/ OFF/Repeat |
| Open-circuit voltage | V | 65 | Insulation class | - | H |
| Up slope | Sec | - | Protection class | - | IP21S |
| Down slope | Sec | - | Dimension (W*D*H) | mm | 306*607*495 |
| Spot time | Sec | - | Net Weight | kg | 38 |
