HERO POWER
Welding Equipment
Welding Equipment
PAW-200
Inverter technology for energy-efficient
Thermal Overload Protection
With special welding function, perfect PLC control contact
Arc current 1-25A adjustable
0-10V analog interface available to control welding current
3-stage switching pulse frequency
Varis welding modes optional, with full pulse wave adjustment function
Complete plasma gas sequence control
Abnormal Signal Alarm Design+
Specifications
| Input Power | V | 220V,1/3Φ | Shield Gas Pre flow time | Sec | 0.1~2.5 |
| - | Shield Gas Post flow time | Sec | 2~25 | ||
| Input voltage range | % | ±15% | Spot time | Sec | 0.1~5 |
| Input frequency | HZ | 50&60 | Pulse current | A | 4~200 |
| Rated input capacity | KVA | 5 | Pulse frequency | HZ | Low：0.4~14 |
| KW | 4 | - | |||
| Rated output | V | 18 | High：14~500 | ||
| A | 200 | Pulse frequency | % | 20~80 | |
| Welding amperage range | A | Main Arc4~200 | Duty cycle | % | - |
| Arc1~25 | 200A / 100% | ||||
| Efficiency | % | 0 | Water cooler control | - | ✔ |
| Open-circuit voltage | V | Main Arc155 | Gas check | - | ✔ |
| Arc120 | Crater control | - | Crater/ Repeat SPOT |
||
| Up slope | Sec | 0.2~5 | Insulation class | - | H |
| Down slope | Sec | 0.2~5 | Protection class | - | IP21S |
| Plasma Gas Pre flow time | Sec | 0.1~2.5 | Dimension (W*D*H) | mm | 550*395*760 |
| Plasma Gas Post flow time | Sec | 0.5~12 | Net Weight | Kg | 68 |
