HERO POWER
Welding Equipment
Welding Equipment
DT-500
Inverter technology for energy-efficient
Built-in adjustable arc properties
Multifunction include TIG pulse,crater,repeat ,Spot,MMA(STICK) etc.
Easy to set up and operate
Pulse function flexible adjustable
4-segment arc control(S-hard/hard/soft/S-soft)
Provide lift arc start
PLC control connection support
0-10V analog interface available to control welding current
3-stage switching pulse frequency
2T welding function for up/down slope
Specifications
| Input frequency | V | 220V,1/3Φ | Post flow time | Sec | 2~15 |
| 380/415V,3Φ | Spot time | Sec | 0.2~10 | ||
| Input voltage range | % | ±15% | Pulse current | A | 10~400 |
| Input frequency | HZ | 50&60 | Pulse frequency | HZ | High：1.3~500 |
| Rated input capacity | KVA | 23.9 | Middle:1.2~45 | ||
| KW | 19.15 | Low：0.3~13 | |||
| Rated output | V | TIG:30 | Pulse Ratio Width | % | 1~99 |
| STICK:40 | Duty cycle | - | 500A/60% | ||
| A | TIG:500 | 387A/100% | |||
| STICK:400 | Water cooler control | - | ✔ | ||
| Welding amperage range | A | TIG:10~500 | AC Balance | - | - |
| STICK:10~400 | Gas check | - | ✔ | ||
| Efficiency | % | 65 | Crater control | - | Crater/Repeat/Spot/Special 2T |
| Open-circuit voltage | V | 75 | Insulation class | - | H |
| Up slope | Sec | 0.2~10 | Protection class | - | IP21S |
| Down slope | Sec | 0.2~10 | Dimension (W*D*H) | mm | 300*730*570 |
| Pre flow time | Sec | 0.2~5 | Net Weight | kg | 56 |
