HERO POWER
Welding Equipment
Welding Equipment
AT-350R
Portable type for on-site use
Inverter technology for energy-efficient
Thermal Overload Protection
Easy to set up and operate
4-segment arc control
(S-hard/hard/soft/S-soft)
Pulse sequence flexible adjustable
Full digital touch screen control
Smart fan control when needed for energy saving
Memorable program 0-99 groups
Provide 10 pin receptacle for welding current remote control
RS 485 and PLC control connection support
Cold welding
Specifications
| Input Power | V | 220, 1/3Φ | Pre flow time | Sec | 0.1~5 |
| 380/415, 3Φ | Post flow time | Sec | 0.1~20 | ||
| Input voltage range | % | ±15% | Spot time | Sec | 0.01~5 |
| Input frequency | HZ | 50&60 | Pulse current | A | 10~350 |
| Rated input capacity | KVA | 12.5 | Pulse frequency | HZ | DC:0.5~2000 |
| KW | 11.5 | AC:0.1~100 | |||
| Rated output | V |
AC TIG:24 | - | ||
| DC TIG:24 | Pulse Ratio Width | % | 1~90 | ||
| STICK: 30 | AC Balance | % | 10~50 | ||
| A |
AC TIG:350 | AC frequency | HZ | 40~250 | |
| DC TIG:350 | Duty cycle | - | 350A / 50% | ||
| STICK: 250 | 221A / 100% | ||||
| Welding amperage range | A |
AC TIG:10~350 | Water cooler control | - | √ |
| DC TIG:10~350 | Gas check | - | √ | ||
| STICK: 10~250 | Crater control | - |
Crater/ Repeat/Special 2T |
||
| Efficiency | % | 85 | Insulation class | - | H |
| Open-circuit voltage | V | 80DC/160AC | Protection class | - | IP21S |
| Up slope | Sec | 0~10 | Dimension (W*D*H) | mm | 300*565*670 |
| Down slope | Sec | 0~10 | Net Weight | kg | 55 |
