HERO POWER
Welding Equipment
Welding Equipment
PT-500
Inverter technology for energy-efficient
Thermal Overload Protection
Multiple welding modes can be selected
(Spot/Crater/Repeat)
Pulse Function included
3-stage switching pulse frequency
2T welding function for up/down slope
PLC control connection support
0~10V analog interface available to welding current
Complete plasma gas sequence control
Pilot arc current 1-30A adjustable
Abnormal signal warning design
Specifications
| Input Power | V | 220, 1/3Φ | Post flow time | Sec | 2~15 |
| 380/415, 3Φ | Spot time | Sec | 0.2~10 | ||
| Input voltage range | % | ±15% | Pulse current | A | 10~500 |
| Input frequency | HZ | 50&60 | Pulse frequency | HZ | High：1.3~500 |
| Rated input capacity | KVA | 29.47 | Middle：1.2~47 | ||
| KW | 23.28 | Low：0.7~27 | |||
| Rated output | V | DC ARC : 21.2 | Pulse Ratio Width | % | 1~99 |
| DC TIG : 40 | Duty cycle | - | 500A / 70% | ||
| A | DC ARC : 30 | 420A / 100% | |||
| DC TIG : 500 | Water cooler control | - | ✔ | ||
| Welding amperage range | A | DC ARC : 0 ~ 30 | AC Balance | - | - |
| DC TIG :10 ~ 500 | Gas check | - | ✔ | ||
| Efficiency | % | 85 | Crater control | - | Crater/ Repeat |
| Open-circuit voltage | V | 75±(10) | Insulation class | - | H |
| Up slope | Sec | 0.2~10 | Protection class | - | IP21S |
| Down slope | Sec | 0.2~10 | Dimension (W*D*H) | mm | 506*716*923 |
| Pre flow time | Sec | 0.2~5 | Net Weight | kg | 95 |
