HERO POWER
Welding Equipment
Welding Equipment
DT-400
Inverter technology for energy-efficient
Thermal Overload Protection
Multifunction include TIG pulse,crater,repeat ,Spot,MMA(STICK) etc.
Easy to set up and operate
Pulse function flexible adjustable
4-segment arc control
(S-hard/hard/soft/S-soft)
Provide lift arc start
PLC control connection support
0-10V analog interface available to control welding current
3-stage switching pulse frequency
2T welding function for up/down slope
Specifications
| Input Power | V | 220V, 1/3Φ | Pre flow time | Sec | 0.2~5 |
| 380/415V, 3Φ | Post flow time | Sec | 2~20 | ||
| Input voltage range | % | ±15% | Pulse current | A | 5~400 |
| Input frequency | HZ | 50&60 | Pulse frequency | HZ | High：1.3~500 |
| Rated input capacity | KVA | 18 | Middle：1.2~45 | ||
| KW | 13.1 | Low：0.3~13 | |||
| Rated output | V | TIG：26 | Pulse Ratio Width | % | 1~99 |
| STICK：30 | Duty cycle | - | 400A / 60% | ||
| A | TIG：400 | 300A / 100% | |||
| STICK：250 | Water cooler control | - | ✔ | ||
| Welding amperage range | A | TIG：10~400 | Cleam | - | - |
| STICK：10~250 | Gas check | - | ✔ | ||
| Efficiency | % | 79 | Crater control | - | Crater/ Repeat/ Special 2T |
| Open-circuit voltage | V | 75(±10) | Insulation class | - | H |
| Up slope | Sec | 0.1~10 | Protection class | - | IP21S |
| Down slope | Sec | 0.1~10 | Dimension (W*D*H) | mm | 300*730*570 |
| Spot time | Sec | 0.2~10 | Net Weight | kg | 43.6 |
