HERO POWER
Welding Equipment
Welding Equipment
AFT-301
Portable type for on-site use
Inverter technology for energy-efficient
Thermal Overload Protection
Easy to set up and operate
4-segment arc control
(S-hard/hard/soft/S-soft)
Pulse sequence flexible adjustable
AC frequency adjustment for precision control penetration
Provide 10 pin receptacle for welding current remote control
Specifications
| Input Power | V | 220, 1/3Φ | Pre flow time | Sec | 0.2~5 |
| 380/415, 3Φ | Post flow time | Sec | 2~20 | ||
| Input voltage range | % | ±15% | Spot time | Sec | 0.1~5 |
| Input frequency | HZ | 50&60 | Pulse current | A | 10~300 |
| Rated input capacity | KVA | 9.4 | Pulse frequency | HZ | High:7.5~500 |
| KW | 8.7 | - | |||
| Rated output | V |
AC TIG:22 | Low:0.4~27 | ||
| DC TIG:22 | Pulse Ratio Width | % | 20~80 | ||
| STICK: 30 | AC Balance | % | 20~50 | ||
| A |
AC TIG:300 | AC frequency | HZ | 45~200 | |
| DC TIG:300 | Duty cycle | - | 300A / 40% | ||
| STICK: 250 | 190A / 100% | ||||
| Welding amperage range | A |
AC TIG:5~300 | Water cooler control | - | √ |
| DC TIG:5~300 | Gas check | - | √ | ||
| STICK: 5~250 | Crater control | - |
Crater/ Repeat |
||
| Efficiency | % | 76 | Insulation class | - | H |
| Open-circuit voltage | V | 80DC/150AC | Protection class | - | IP21S |
| Up slope | Sec | 0.1~5 | Dimension (W*D*H) | mm | 305*660*565 |
| Down slope | Sec | 0.1~5 | Net Weight | kg | 48 |
