HERO POWER
Welding Equipment
Welding Equipment
AFT-500
Inverter technology for energy-efficient
Thermal Overload Protection
Easy to set up and operate
4-segment arc control
(S-hard/hard/soft/S-soft)
Pulse sequence flexible adjustable
Provide 10 pin receptacle for welding current remote control
Specifications
| Input Power | V | 220, 1/3Φ | Pre flow time | Sec | 0.2~5 |
| 380/415, 3Φ | Post flow time | Sec | 2~15 | ||
| Input voltage range | % | ±15% | Spot time | Sec | 0.1~5 |
| Input frequency | HZ | 50&60 | Pulse current | A | 10~500 |
| Rated input capacity | KVA | 22.91 | Pulse frequency | HZ | High:7.5~500 |
| KW | 21.33 | - | |||
| Rated output | V |
AC TIG:30 | Low:0.4~27 | ||
| DC TIG:30 | Pulse Ratio Width | % | 20~80 | ||
| STICK: 36 | AC Balance | % | 20~50 | ||
| A |
AC TIG:500 | AC frequency | HZ | 60 | |
| DC TIG:500 | Duty cycle | - | 500A / 60% | ||
| STICK: 400 | 390A / 100% | ||||
| Welding amperage range | A |
AC TIG:25~500 | Water cooler control | - | √ |
| DC TIG:10~500 | Gas check | - | √ | ||
| STICK: 10~400 | Crater control | - |
Crater/ Repeat |
||
| Efficiency | % | 70 | Insulation class | - | H |
| Open-circuit voltage | V | 67DC/120AC | Protection class | - | IP21S |
| Up slope | Sec | 0.1~5 | Dimension (W*D*H) | mm | 445*610*550 |
| Down slope | Sec | 0.1~5 | Net Weight | kg | 80 |
